美國貝爾 Bell800反滲透專用無磷阻垢劑----（12倍濃縮液）  

產品用途：

   Bell800是高效的液體阻垢/分散劑，用于控制膜分離系統中碳酸鹽、硫酸鹽及氧化鐵沉淀造成的結垢，適合所有水源，特別是井水，此種高效阻垢/分散劑的配方是專為與PAC、ST及其它有機絮凝劑兼容所設計的。
    使用此阻垢/分散劑可延長系統清洗周期，使膜壽命延長而降低運行成本，Bell800已廣泛應用于反滲透系統中。

產品特點：

1、與所有絮凝劑兼容。

2、有效的控制碳酸鈣、硫酸鈣結垢，濃水側lsi達3.0仍不結垢。

3、有足夠的分散能力以分散膜表面阻塞微粒。

4、適用于所有主要的膜。

5、進水的ph值在5-9屬有效范圍。

6、與進水中的鋁及鐵氧化物兼容。

7、可直接投加或稀釋投加，液體產品稀釋簡便。

投加要求：

加藥點：為了達到最大的效能，Bell800最好在保安過濾器之前投加。

加藥量：根據進水鹽度、溫度和回收率，通過軟件計算出一個參考的加藥量，再根據特定的水系條件確定一個合適的加藥量。

稀 釋：產品濃縮液首先稀釋10倍成標準溶液。然后可直接投加或稀釋投加，稀釋要用反滲透的產水或除鹽水，稀釋倍數應不超過12。

產品特性（12倍濃縮液）

外  觀：無色到淡黃色液體

比  重：1.45±0.05

p   h： 2.00±0.50

凝固點：-13℃

有效期：4年

最低存放溫度：-8℃

包裝規格:

Bell800是液態，包裝形式為27.55公斤/桶。

Bell Bell800 RO phosphorus inhibitors ---- (12 fold concentrate)
                                                                                      
                                                         
 
Product Use:
    
    Bell800 scale is a high liquid / dispersant, membrane separation system for controlling the carbonate, sulfate and iron oxide precipitation caused by fouling, for all the water, especially water, such a scale and / dispersant the recipes are designed for use with PAC, ST and other compatible organic flocculant design.
     Use this scale / dispersant extended system cleaning cycle, the membrane life and reduce operating costs, Bell800 been widely used in reverse osmosis systems.
 
Product Features:
 
1, is compatible with all flocculant.
2, the effective control of calcium carbonate, calcium sulfate scale, concentrated water side lsi up +3.0.
3, there is sufficient dispersion capability to block particles dispersed film surface.
4, applies to all the major film.
5, the water's ph value is valid in the 5-9 range.
6, with the influent compatible with aluminum and iron oxides.
7, can be added directly or diluted dosing liquid products dilution is simple.
 
 
Dosing requirements:
 
Dosing point: In order to achieve maximum performance, Bell800 best in security filter before dosing.
Dosage: According to the water salinity, temperature and recovery, calculated by the software plus a reference dose, according to the specific water conditions to determine an appropriate dosage.
 
Dilution: Product concentrate first diluted 10-fold into a standard solution. Can then be added directly or diluted dosing, dilution to use reverse osmosis water or demineralized water production, dilution should not exceed 12.
 
Product Features (12 fold concentrate)
 
Appearance: colorless to pale yellow liquid
Specific gravity: 1.45 ± 0.05
p h: 2.00 ± 0.50
Freezing point: -13 ℃
Duration: 4 years
Minimum storage temperature: -8 ℃
 
Packing:

Bell800 is a liquid, packaged in the form of 27.55 kg / barrel.